What type of service are you looking for?

At the moment we are building Sunset Villas complex
You can build your dream house or villa with us!
Do you like this house? Check out our new project for mountain chalet!
Home Finishing works Plasterboard

Plasterboard

Installation of plasterboard

In the last few years plasterboard (or drywall) is used widely in construction. It is used to make interior partition walls, suspended ceilings, etc. In some cases the installation of plasterboard saves the rough plastering of the walls (from brick, stone, Ytong blocks, reinforced concrete, etc.) and provides internal thermal insulation. In all these cases the boards are installed in a suitable way so that they are firmly fixed.

Most often the boards are fixed to metal frames, but the method where the plasterboard is directly glued to the wall is also popular. This method requires skill and experience, good organization and precision as the adhesive dries out fast and no corrections can be made to the already glued boards. It is not advisable to glue plasterboards to reinforced concrete walls as the adhesive cannot penetrate the concrete and it cannot provide good cohesion.

Plasterboard should not be glued to plaster as well, as plaster can easily come off together with the whole plasterboard wall. In this case we use metal frames and wall plugs and other similar constructions. One should take into consideration that the plasterboard does not provide good noise insulation so if you are looking to achieve that an additional insulation layer has to be placed – most often rock-wool.

Plasterboard insulation can also be used on outer walls (on their internal part). Compared to external thermal insulation this method has its advantages and disadvantages. On the one hand, it uses about 5 to 8 cm of the living area of the property (this includes the construction for fixing the plasterboard and the insulation layers) and a metal frame must be placed as well, otherwise the glue plays the part of a thermo bridge and transfers the low temperatures from outside to the interior of the property which makes the thermal insulation pointless.

Internal thermal insulation is not effective if there is mould and if there is already dampness on the walls of the rooms. If this kind of insulation is made in such a case it will only make the problem worse and it will allow the mould to spread even further under the plasterboard wall, which is unacceptable and dangerous for the people using and living in the room. If there is mould in the room the most effective solution is external insulation.

On the other hand, the advantages of internal thermal insulation with plasterboard is the lower price compared to the price of external thermal insulation. The walls in the property become perfectly even and the different cables can be organized much more easily in the process of putting the plasterboard instead of making cable ducts in the wall itself.

Such repair works with installation of internal insulation can be done at any time of the year, regardless of the season and the weather outside, without the need of scaffolding or any other special method of installation.

The insulation itself is good and reliable, but as we already mentioned it must not be placed in rooms where there is already mould and dampness on the walls or the result would be the so-called sick building syndrome.

This term is popular in America, where a large number of the pre-fabricated houses there have become dangerous to their inhabitants, because the bad insulation and poor ventilation in the rooms, combined with high humidity, have made the buildings grow mouldy and the mould has penetrated the walls.

In such cases the only solution is replacement of the mouldy walls and in the most severe cases – the rebuilding of the house. Fortunately, this problem is not that widespread here, but taking into consideration what happens when there is already dampness and mould in a property one must select their insulation carefully - and we know how to do that.

When the plasterboard is well installed and provides good noise insulation it is a very valuable tool for arranging internal spaces. It is a light material that is often used for changing a room’s layout and for other purposes of interior design.
Finishing works

Plastering and puttying

We know that the beauty of every wall and ceiling lies in its beautiful surface. After the wall is built from the respective building materials – bricks, Ytong blocks, plasterboard, concrete, reinforced concrete, etc. what follows is its plastering. By plastering the walls and the ceilings they become even and their imperfections are corrected so that they become smooth and geometrically straight and smooth right angles are formed where the walls meet. Plastering covers all ducts for electrical,… View more 

Request an offer

Finishing works

Decorative plasterwork and mosaics

Plastering and decorative plasterwork, mosaic and decorative mosaics
We can offer you a wide variety of mosaics, decorative mosaics, plasters and decorative plasters. Depending on the bonding agent, plasters can be mineral, silicone, silicate and polymer. Decorative plasters with mineral base can have an extremely beautiful rustic structure. The diversity of plasters with rustic structure is due to the different size of the fractions and the depth of the tracks left after the plastering and also to the way they are plastered to the surface – vertically,… View more 

Request an offer

Finishing works

Flooring

Laying of faience, terracotta, fine stoneware tiles, slabs from natural stone or wood
We offer you a team of skilled workers who will install the hard floorings in your home in a professional manner, whether they are from faience, terracotta, fine stoneware tiles, slabs of natural stone or wood, cork, etc. We believe in a job well done and that is why the floorings we make are of impeccable appearance and quality. In interior design the flooring in each room is one of the main elements that create its ambience. The texture, the raster and the colour scheme can optically increase… View more 

Request an offer

Finishing works

Parquet and wooden flooring

Setting of floorings from natural wooden material
The natural oak or beech flooring is used for many years already. This type of flooring has proven its qualities, its strength and durability. Of course, like any natural material, the wooden flooring needs maintenance at certain periods of time. The maintenance includes sanding, varnishing, constriction, application of paste, polishing, and in extreme cases - rearrangement. The parquet flooring can be arranged in several ways, which are well known to the skilled artisans. When setting this type of… View more 

Request an offer

Finishing works

Installation of bathtubs, sanitary equipment, boilers, etc.

Installation of bathtubs, sanitary equipment, boilers, etc
We can offer you a choice and professional installation of various elements and equipment: Baths, shower cabins and hydro massage panels; Sanitary faience; Saunas and steam baths; Water heaters and boilers; Various systems for video surveillance and security; Intercom systems; Installation of electric switches and lighting; other. For more information or questions, please contact us.… View more 

Request an offer